# Reminder: 🎺 The Flow Forte Network Upgrade on October 22nd at 13:00 UTC

**URL:** <https://forum.flow.com/t/reminder-the-flow-forte-network-upgrade-on-october-22nd-at-13-00-utc/8350>\
**Category:** Node Operations\
**Created:** [October 16, 2025, 9:59pm UTC](https://forum.flow.com/t/reminder-the-flow-forte-network-upgrade-on-october-22nd-at-13-00-utc/8350 "2025-10-16T21:59:59Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![vishal](https://avatars.discourse-cdn.com/v4/letter/v/49beb7/32.png) [@vishal](https://forum.flow.com/u/vishal)\
**Post date:** [October 16, 2025, 9:59pm UTC](https://forum.flow.com/t/reminder-the-flow-forte-network-upgrade-on-october-22nd-at-13-00-utc/8350/1 "2025-10-16T21:59:59Z")

</div>

Hello Flow Node operators,

This is a reminder that Flow Mainnet will be undergoing an upgrade on Wednesday, October 22nd 2025, from 13:00 to 15:00 UTC (6AM to 8AM PDT).

## ACTIONS needed from **Access, Collection, Consensus, Verification** and **Execution** node operators on October 22nd, 2025:

1. If you are running an Access node, please shut down the node(s) by 12:45 UTC on October 22nd.

2. For all other node types (Consensus, Collection, Verification, Execution), please shut down your node at 13:00 UTC on October 22nd.

3. At around 15:00 UTC on October 22nd, a message will be posted on the message forum and on Discord requesting you to start your nodes. Please be on the lookout for the message. Ensure that you have subscribed for updates on the [forum page](https://forum.flow.com/c/node-operations/36) or have joined the Discord `#flow-validators` or the `#node-operations` channel.

4. Perform [Step 1](https://developers.flow.com/protocol/node-ops/node-operation/network-upgrade#step-1---cleaning-up-previous-spork-state) and [Step 2](https://developers.flow.com/protocol/node-ops/node-operation/network-upgrade#step-2---start-your-node) when you see the announcement “Mainnet Spork Complete” on the forum or Discord.

## Reduced Hardware Requirements for Node Roles

As part of the Forte network upgrade, you can now run all node roles except Execution on smaller hardware configurations. The recommended CPU and memory requirements for Access, Verification, Collection, and Consensus nodes have been lowered, making it possible to operate these roles more efficiently and cost-effectively.

Please see the revised hardware recommendations [here](https://developers.flow.com/protocol/node-ops/node-operation/node-provisioning).

If you are running one of these node types, you may reduce your allocated vCPUs and memory during the upgrade process (no change to disk size). To take advantage of this, simply adjust your hardware allocation after shutting down your node for the upgrade and before restarting it once the “Mainnet Spork Complete” message is announced.

This update gives operators the flexibility to lower infrastructure costs while maintaining high performance and reliability.

* * *

## ACTIONS needed from **EVM Gateway** operators on October 22nd, 2025:

1. If you are running an EVM GW, please shut down the EVM GW by 12:45 UTC on October 22nd.

2. At around 15:00 UTC on October 22nd, a message will be posted on the message forum and on Discord requesting you to start your nodes. Please be on the lookout for the message. Ensure that you have subscribed for updates on the [forum page](https://forum.flow.com/c/node-operations/36) or have joined the Discord #flow-validators or the #Node Operations channel.

3. Update EVM Gateway to docker tag v1.3.5

4. Update the following flags:  
`--access-node-spork-hosts=access-001.mainnet25.nodes.onflow.org:9000,access-001.mainnet26.nodes.onflow.org:9000` and

`--access-node-grpc-host:9000=access.mainnet.nodes.onflow.org`

or point it to the gRPC endpoint of your own access node if you are running one.

Do **NOT** delete the data folder of the EVM Gateway.

* * *

_Note: Flow Port will be inaccessible during the duration of this network upgrade, and staking features will be disabled until the completion of the network upgrade._

Please plan accordingly for this Flow network upgrade and ensure that you upgrade the node immediately after the announcement.

Thank you for your continued support,

The Flow Foundation

---

<div class="post-metadata">

**Author:** ![vishal](https://avatars.discourse-cdn.com/v4/letter/v/49beb7/32.png) [@vishal](https://forum.flow.com/u/vishal)\
**Post date:** [October 20, 2025, 8:54pm UTC](https://forum.flow.com/t/reminder-the-flow-forte-network-upgrade-on-october-22nd-at-13-00-utc/8350/2 "2025-10-20T20:54:22Z")

</div>

updated the EVM GW tag to v1.3.5 (was v1.3.3)

---

<div class="post-metadata">

**Author:** ![vishal](https://avatars.discourse-cdn.com/v4/letter/v/49beb7/32.png) [@vishal](https://forum.flow.com/u/vishal)\
**Post date:** [October 22, 2025, 12:09pm UTC](https://forum.flow.com/t/reminder-the-flow-forte-network-upgrade-on-october-22nd-at-13-00-utc/8350/3 "2025-10-22T12:09:26Z")

</div>

1. Docker tag to upgrade to _ **after** _ the upgrade: `v0.43.2-cadence-v1.7.2-rc.1` , or `v0.43.2-cadence-v1.7.2-rc.1-without-adx` or `v0.43.2-cadence-v1.7.2-rc.1-without-netgo-without-adx` or `v0.43.2-cadence-v1.7.2-rc.1-arm` (will also be part of the next announcement).

2. Token: `mainnet-27`.

1 & 2 to be used after the upgrade.  
Will also post this as separate announcement once the upgrade is complete on our end.

---

<div class="post-metadata">

**Author:** ![vishal](https://avatars.discourse-cdn.com/v4/letter/v/49beb7/32.png) [@vishal](https://forum.flow.com/u/vishal)\
**Post date:** [October 23, 2025, 11:36pm UTC](https://forum.flow.com/t/reminder-the-flow-forte-network-upgrade-on-october-22nd-at-13-00-utc/8350/4 "2025-10-23T23:36:15Z")

</div>

updated `--access-node-spork-hosts` flag for EVM GW
